Menu
Artificial grass is a smart, cost-effective solution for homeowners seeking to save water and reduce maintenance expenses. Suitable for yards of all sizes, it’s easy to install and maintain, making it a valuable addition to your home. Enhance your outdoor space by turning underused areas into vibrant, functional living spaces. Whether you’re covering decking, concrete, or a natural surface, our step-by-step installation guide ensures a seamless transformation with Grassify.
Use a 100-foot tape measure to assess your yard’s size. You can also use tools like Google Maps for an aerial view to estimate the turf needed.
Remove the current ground cover using equipment like a sod cutter, skid steer, or shovel. This process can be labor-intensive, especially if there’s a lot of landscaping to clear.
If your soil drains well, installation will be easy as synthetic grass is usually permeable. For areas with poor drainage or hard surfaces like concrete, install a proper drainage system before proceeding. Small drainage gaps around the perimeter can help if rainfall is light.
Although optional, a weed barrier prevents weeds from growing through the synthetic grass. It’s an affordable and helpful step to ensure your turf stays low-maintenance.
Smooth out your base material with a landscaping rake. A 2-3% slope is ideal for efficient drainage. Depending on your region, you may need to use gravel, crushed rock, or decomposed granite. For colder areas, a deeper trench may be necessary for weather protection. Add a shock or lawn pad if desired, especially for added safety.
Roll out the synthetic turf over your prepared base and allow it to regain its shape. Ensure the base is dry and smooth. If the surface is uneven, compact it more. Cut and fit the turf as needed, ensuring seams and grass blades face the right direction.
Place seam fabric over the base layer just beneath the turf to help secure it.
Use a carpet stretcher or kicker to pull the turf tight, removing wrinkles and ensuring the surface is securely laid. Stretching prevents expansion due to heat and keeps the turf in place.
Trim the turf edges by 2-3 rows to prevent uneven edges and ensure a clean, secure fit. Use a utility knife for precise cuts.
Peel back the turf to expose the seaming tape, apply glue in a serpentine pattern, and fasten the edges. Use staples or nails for a tighter hold along the seams. Allow the glue to dry for two hours.
Fasten the turf around the edges using stakes or anchor pins spaced every 6-8 inches. Be careful not to hammer too hard to avoid creating dips.
Finally, apply the infill to help keep the blades upright and ensure the turf stays weighted. Use a drop spreader or scatter the material by hand, then rake to a smooth finish. Make sure the turf is dry before applying the infill for optimal results.